-40%

Dental X Ray Imaging System Digital X-Ray Sensor USB 2.0 Connection Cable Oral

$ 333.66

Availability: 15 in stock
  • Return shipping will be paid by: Buyer
  • Operating Voltage: 5VDC
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Low contrast resolution: Able to display holes with 1mm, 1.5mm, 2mm and
  • Brand: BODE
  • Condition: New
  • Adaptor Size: 60mm×40mm×29.2mm
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Effective image area: 20.16*20.16mm
  • Total Cable Length: 3 m (sensor cable + control box cable to PC)
  • Input power: 500mW
  • Image uniformity: ≤2%
  • Spatial Resolution: ≥7Lp/mm
  • Sensor Size: 26.5mm×32mm×11.7mm

    Description

    Store category
    Sign Up Now !
    You may also like
    Dental X Ray Imaging System Digital X-Ray Sensor USB 2.0 Connection Cable Oral
    Product Description
    Operating Voltage
    5VDC
    Input power
    500mW
    Spatial Resolution
    ≥7Lp/mm
    Low contrast resolution
    Able to display holes with 1mm, 1.5mm, 2mm and
    Image uniformity
    ≤2%
    Effective image area
    20.16*20.16mm
    Sensor Size
    26.5mm×32mm×11.7mm
    Adaptor Size
    60mm×40mm×29.2mm
    Total Cable Length
    3 m (sensor cable + control box cable to PC)
    Brand
    BODE
    MPN
    Does Not Apply
    Discription:
    The intraoral sensor is the key component for imaging. It converts the X-ray signals into electrical signals that will be
    transmitted to the acquisition workstation. The sensor is connected to the workstation via the USB 2.0 connection.
    Before connecting the sensor, do not start the acquisition workstation software. Do not disconnect the sensor during the image acquisition
    process, otherwise the sensor can be damaged.
    Notice:
    1. The digital intraoral X-ray sensor is compatible with relating electromagnetic
    compatibility requirements laid down in IEC60601-1-2;
    2. The user should install and use the product according to the electromagnetic
    compatibility requirements laid down in the documents with shipment;
    3. Portable or mobile RF communicaion devices might affect the products performance.
    When using the product, avoiding strong electromagnetic interference, like being cclose
    to mobile phones, microwaves or etc.;
    4. For guidance and manufacturer's statements, refer to the appendixes.
    5. The troulbeshooting in the appendix also applies to the electromagnetic
    compatibility test. If trouble occurs, refer to appendex; trouble shooting.
    Product Components:
    The products is mainly composed of a sensor, an adaptor, a USB connection cable
    and workstation software. Other standard accessories include a box of protective
    sheath, a silicon loop and a sensor holder.
    Payment
    About shipping
    Statement(FDA)
    Contact us
    Positive feedback
    Payment
    We accept PAYPAL payment. Payment should be sent within 7 business days.
    About shipping
    We usually ship item by economic post air mail. It usually takes approximately 15-30 business days. Somtimes, it might take much longer time because of customs things. If you want express shipping such as DHL, EMS etc,please contact with us.
    Statement(FDA)
    Statement(FDA)
    The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
    Contact us
    For any questions before and after sale, please leave us ebay message, and we will do our best to resolve them.
    Positive feedback
    Please leave us a positive feedback to us if you feel our product & service is ok, our system will do the same to you automatically.
    Feedback